Новые поступления

3DR Radio 915Mhz Module w/ Anteena for Telemetry on APM 2 - Blue + Green 3dr radio 915mhz module w anteena for telemetry on apm 2 blue green
Brand N/A Quantity 1 Piece(s)/pack Color Blue + green Material PCB Compatible device RC helicopter Functions Aircraft carrying and connect computer Other Feature The 3DRobotics 3DR Radio is the ideal way to setup a telemetry connection between your APM and a ground station. Small inexpensive and with great range the 3DR radio uses an open source firmware which allows us to do things that cannot be done with other radios; Radio features: Air module size: 17 x 35mm (without antenna); Ground module size: 17 x 59mm (without antenna); Air module Weight: 16.4g (including cable and antenna); Ground module weight: 16.5g (including antenna); Available in 900MHz or 433MHz variants; Receiver sensitivity to -121dBm; Transmit power up to 20dBm (100mW); Transparent serial link; Air data rates up to 250kbps; Range of approx 1 mile; MAVLink protocol framing and status reporting; Frequency hopping spread spectrum (FHSS); Adaptive time division multiplexing (TDM); Supports for LBT and AFA; Configurable duty cycle; Built in error correcting code (can correct up to 25% data bit errors); Demonstrated range of several kilometers with a small omni antenna; Can be used with a bi-directional amplifier for even more range; Open source firmware; AT commands for radio configuration; RT commands for remote radio configuration; Adaptive flow control when used with APM; Based on the HopeRF HM-TRP radio module featuring an SiLabs Si1000 RF microcontroller. Documentation: http://code.google.com/p/ardupilot-mega/wiki/3DRadio; Radio Configurator(Air module need a USB-UART tool like FTDI to configure): http://vps.oborne.me/3drradioconfig.zip Packing List 1 x Air module 1 x Ground module 2 x Antennas 1 x Cable (30cm)
2119.3 RUR
433Mhz Single TTL 3D Robotics 3DR Radio Telemetry Kit for APM APM2 - Blue + Green 3dr radio 915mhz module w anteena for telemetry on apm 2 blue green
Brand N/A Quantity 1 Piece(s)/pack Color Blue + green Material PCB Compatible device RC helicopter Functions Aircraft carrying and connect computer Other Feature The 3DR Radio telemetry system is designed as an open source Xbee replacement radio set offering a lower price longer range and superior performance to Xbee radios. It's available in 915MHz; and in the following configurations: serial board (for the air) and USB (for the ground); The radio is a 2-way half-duplex wireless communication system with a standard TTL UART interface based on HopeRF's HM-TRP data link modules and custom firmware that improves upon the modules' original features and performance; The SiK firmware includes a bootloader that permits radio firmware upgrades over the serial interface and radio firmware with configurable parameters. Firmware upgrades and configuration are fully supported in the APM Mission Planner. Configuration is also possible through AT commands; The item not support Win 7 please consider before buying; 3DR Telemetry Kit Specifications: Air module size:17 x 45mm (without antenna); Ground module size:17 x 69mm (without antenna); Air module Weight: 16.4g (include cable and antenna); Ground module Weight: 16.8g (include antenna); 433MHz; Receiver sensitivity to -121dBm; Transmit power up to 20dBm (100mW); Transparent serial link; Air data rates up to 250kbps; MAVLink protocol framing and status reporting; Frequency hopping spread spectrum (FHSS); Adaptive time division multiplexing (TDM); Supports for LBT and AFA; Configurable duty cycle; Built in error correcting code (can correct up to 25% data bit errors); Demonstrated range of several kilometers with a small omni antenna; Can be used with a bi-directional amplifier for even more range; Open source firmware; AT commands for radio configuration; RT commands for remote radio configuration; Adaptive flow control when used with APM; Based on HM-TRP radio modules with Si1000 8051 micro-controller and Si4432 radio module; Please note that it is up to you to make sure you are allowed to use these radio modules in your country; These devices can be used as short range licence expemp devices the UK under ESTI EN300 220 please refer to Ofcom IR2030 document page 17. You will need to configure the device to comply with your countries regulations; 3DR official instructions: https://code.google.com/p/arducopter/wiki/APM13DRadio?wl=zh-Hans; Special setting tool: http://vps.oborne.me/3drradioconfig.zip; Official PCB and schematic diagram: http://stuff.storediydrones.com/3DR-Radio.zip; http://stuff.storediydrones.com/3DR-Radio-USB.zip Packing List 1 x Air module 1 x Ground module 2 x Antennas 1 x Cable (30cm)
2014.96 RUR
3DR Radio Telemetry Kit With Case 433MHZ 915MHZ For MWC APM PX4 Pixhawk 3dr radio 915mhz module w anteena for telemetry on apm 2 blue green
3DR Radio Telemetry Kit With Case 433MHZ 915MHZ For MWC APM PX4 Pixhawk Ground station: Description: Item Name: 3DR Radio Telemetry Module Support to MWC / APM / PX4 / Pixhawk flight control Feature: Small size and light weight CP2102 high quality USB to TTL chips Alternatively 433MHZ or 915MHZ version Support MWC / APM / PX4 / Pixhawk other open source flight control Receiver sensitivity of -118 dBm The maximum transmit power 100mW MAVLink Framework Agreement Open Source Firmware Frequency hopping spread spectrum (FHSS) 2-way full-duplex communication adaptive TDM Up to 25% can be corrected bit errors Based Si1000 and Si4432 wireless microcontroller modules. Package Included: 1 x 3DR Radio Telemetry with the case 2 x cables (APM/PIX) 2 x 3.5dbi antennas
23.89 RUR
APM2.6 Flight Controller w/ NEO-6M GPS Module and CRIUS MAVLink-OSD V1.0/ 915MHz 3DR Radio Telemetry 3dr radio 915mhz module w anteena for telemetry on apm 2 blue green
Ublox NEO-6M GPS module: Compatible with APM serial port and I2C port. CRIUS MAVLink-OSD V1.0: Features Working voltage: 5~12V. 915MHz 3DR Radio Telemetry Kit: Receiver sensitivity to -121 dBm; Air data rates up to 250kbps
8247.78 RUR